The Signet 4630 Chlorine Analyzer System is an integrated all-in-one system designed to measure free chlorine.
The 3-4630-21 chlorine panel with the optional pH sensor is used to accurately calculate free chlorine in applications that have varying pH values (±0.20 pH units).
In applications where the pH is stable, the pH sensor is not required and the pH value is manually entered into the transmitter to calculate the chlorine levels. (-20 version).
The Signet 2750 pH/ORP Sensor Electronics featuring the DryLoc® connector, provides a variety of functions to suit various requirements. The 2750 has a preamplified signal and features two different outputs: a twowire 4 to 20 mA loop output with EasyCal function or a digital (S3L) output which allows for longer cable lengths and is compatible with the Signet 8900 Multi-Parameter Controller.
The FCL series Free Chlorine sensors are available for real time 0-2ppm, 0-5ppm and 0-10ppm measurements. An isolated 4-20mA outputs offers versatility in interfacing these sensors.
The FCL series Free Chlorine sensors utilize amperometric technology for real time Free Chlorine measurements. Applications include water treatment disinfection and free chlorine generators.
The CLD series chlorine dioxide sensors are available for real time, 0-2ppm and 0-10ppm measurements. An isolated 4-20mA output offers versatility an interfacing these sensors.
The CLD series chlorine dioxide sensors utilize amperometric technology for real time chlorine dioxide measurements. Applications include water treatment disinfection and chlorine dioxide generators. These sensors provide a fixed 4-20mA output which is temperature compensated.
|The Signet 2630 Amperometric Chlorine electrode is designed to measure free chlorine in drinking water and wastewater treatment applications. The electrodes are available with a measurement range of 0 to 5 ppm. This electrode requires the Signet 2650 Amperometric Electronics module to communicate with the Signet 8630-3 Chlorine Transmitter. Utilizing smart-sensor technology, this electrode has a unique embedded memory chip and can communicate a wide variety of information to the Signet 2650 electronics and Signet 8630-3 Transmitter.|
The Signet 2650 Amperometric Electronics provide the polarization voltage and signal conditioning required by all Signet Amperometric Sensors.
The 2650 Amperometric Electronics also relays important sensor information that is stored on a memory chip inside the sensor and displayed on the 3-8630-3P transmitter. Information includes factory calibration data, service life, calibration information and more.
Signet’s patented DryLoc connector provides a quick and secure connection to the sensor. Gold-plated contacts and an O-ring seal ensure a waterproof and reliable interconnect to the sensor.
The FC72 flow cell is designed tissue ¼” tube fittings. Replacement membrane caps and refill electrolyte are available to enhance service life of the sensors. Caps are pre-membraned for ease of replacement. Electrolyte is sold separately in 30mL bottles. FM001 flow meter is available in dual gpm and lpm scaling.
Replacement membrane caps and refill electrolyte are available to enhance service life of the sensors. Caps are pre-membraned for ease of replacement. Electrolyte is sold separately in 30mL bottles.