Controles y Válvulas S.A. de C.V.

Automatización, Medición y Control

You are here: Productos por función Sensores Temperatura
Temperatura

The 2350 Temperature Sensor has a one piece injection moulded PVDF body that is ideal for use in high purity applications. It also outlasts metal sensors in aggressive liquids and eliminates the need for costly custom thermowells. These sensors are available with proprietary digital output (S3L) or field-scaleable 4 to 20 mA output.

  • Indicates media temperature using a temperature-actuated liquid in the sensing element and a highly accurate, high quality pressure gauge
  • As the media temperature increases, the capillary fill fluid vaporizes, increasing pressure in the Bourdon tube to activate the movement and pointer for proper indication
  • Highest quality thermometers available on the market
  • Corrosion-resistant 304 stainless steel case and bezel provide a hermetic seal to prevent lens fogging and moisture damage
  • Temperature ranges from -100 to 150 °F through 200 to 1000 °F, single and dual scales available
  • Accuracy: ±1% Full Scale, Grade A, ASME B40.3
  • High quality, cost-effective thermometer
  • Designed for limited space applications, or where a weather-resistant, tamper-proof case is required
  • Temperature ranges from -100 to 150 °F through 200 to 1000 °F, single and dual scales available
  • Descarga el pdf para ver todos los articulos de temperatura que ofrecemos de Kobold

    • HC2-P0: measurement in hard-to-reach air ducts
    • HC2-HP: measurement of bulk materials
    • HC2-HK: spot check measurements over a wide temperature range
    • HC2-HS: measurements of paper stacks and rolls

     

     

    • HC2-IC / HC2-IM: industrial processes
    • HC2-C0: measurement in tight spaces
    • HC2-IE: pressurized conduits and vessels
    • HC2-S: ambient air with an indicator, transmitter or data logger
    • HC2-S3: weather stations, agricultural stations, etc.

     

     

    The PS1 is a battery operated portable indicator with an integral sword probe that measures temperature and relative humidity when inserted in a stack of paper. Both parameters are simultaneously displayed on an easy to read LC display. The PS1 was designed with the paper and printing industries in mind.
    Its speed and reliability for measuring relative humidity and temperature in paper stacks is unparalleled. In contrast to the classical sword probe hygrometer, the PS1 measuring chamber is much smaller and therefore comes into equilibrium with the surrounding paper within a few minutes. This guarantees quick, reliable measurements. Our advanced technology stems from many years of collaboration with paper industry professionals. The PS1 is also used for measuring paper rolls. This is done by cutting through 3 or 4 layers of paper, over a length of 7 to 10 inches from one edge of the roll, to permit insertion of the probe.

     

    The HP23 is a multi-function hand-held indicator that can read the data from up to two HygroClip 2 probes and display relative humidity, temperature and a calculated parameter such as the dew or frost point. Any probe input can also be configured by the user to accept a third party analog probe (restrictions apply).

    The HP22 is a versatile hand-held indicator that displays relative humidity, temperature and a calculated parameter such as the dew or frost point, based on the measurements of a HygroClip 2 plug-in probe. Probe selection is based on the application. Depending on the HygroClip 2 probe model, the measuring range is within 0 to 100 %RH and -100 to 200°C (-148 to 392°F). The HygroClip 2 probes feature durable sensors and consistent performance. All HygroClip 2 probes can be hot-swapped to facilitate routine calibrations.
    The HP22 indicator has an extensive set of settings and functions that can be enabled and configured by the user either directly from the keypad or with the ROTRONIC HW4 software.

    The HP21 is a highly accurate hand-held indicator that displays relative humidity, temperature and the dew or frost point. The HP21 is perfect for spot checking HVAC installations, manufacturing and storage areas, and generally for all ambient air measurement within the temperature range of -10 to 60°C (14 to 140 °F). The key features of the HP21 will meet user requirements ranging from the most basic to demanding. The HP21 indicator has an extensive set of settings and functions that can be configured and enabled by the user with the ROTRONIC HW4 software. In spite of its sophistication, the HP21 can still be used just as a simple humidity and temperature indicator. Whether you decide or not to take advantage of its full potential, the HP21 will let you have it your way.

     

    Descarga el pdf para ver más productos de Dwyer